1703022 pneumatic control valve For FAST
1. Close the pneumatic valve and release the gas pressure inside the pipeline.
2. Find the manual valve stem on the pneumatic valve and rotate the stem to open the valve.
3. Rotate the valve according to the requirements and adjust its opening size. Note that the opening of the valve should be adjusted according to the requirements of flow rate and pressure.After adjustment, locate the manual valve stem on the pneumatic valve and return it to its original position.
4. Gradually increase the pressure inside the pipeline and observe the opening of the valve. If further adjustments are needed, the above steps can be repeated.
Automatic adjustment
1.According to the installation requirements of the pneumatic valve regulator, install the regulator on the pneumatic valve.
2. Connect the regulator to the required pressure and flow monitoring devices.
3. Set the required flow rate or pressure of the pneumatic valve through a regulator as needed.
4. Start the automatic adjustment program and observe the start, operation, and stop of the pneumatic valve. If further adjustments are needed, they can be controlled through a regulator.
Product Deatials
| Part Name | Pneumatic Control Valve | Part Number | 1703022 |
| Model | / | Application | For FAST |
| Package Size | / | GW |
0.6kg |
| MOQ | 1 PC | Brand Name | CBP |
Hot Tags: 1703022 pneumatic control valve for fast, China 1703022 pneumatic control valve for fast manufacturers, factory, excavator fuel filter parts, loader parts, , functional paver parts, excavator starter parts, paver components
