Clutch release bearing unit 85CT5765F0 For FAST
Installation of separated pull ring components
Install the clamp into the three windows of the separation ring inner hole, ensuring that the clamp handle is located inside the large window.Align the assembled separation ring with the three sets of short separation fingers on the membrane ring for installation, ensuring precise positioning.
Insert the fixing ring into the six hooks of the separation ring, and align the opening of the fixing ring with the position of the clamp handle.
Assembly of separated bearings and shift forks
Apply an appropriate amount of grease to the inner hole of the bearing and install it into the outer sleeve of the first shaft of the gearbox.
Insert the fork into the mating surface of the bearing sleeve seat, paying attention to the installation direction of different types of bearings (to avoid reverse installation).
Special attention should be paid to the pull clutch:
Do not first press the separation shaft onto the pressure plate, but directly install the pressure plate onto the flywheel, and then fit the separation bearing onto the bearing guide seat of the gearbox (without adjusting the clearance temporarily).
After installing the gearbox, connect the clutch slave cylinder, continuously step on the clutch pedal to make the release bearing automatically snap into the pressure plate, and finally adjust the fit clearance between the bearing and the guide seat.
Product Deatials
| Part Name | Clutch Release Bearing Unit | Part Number | 85CT5765F0 |
| Model | / | Application | For FAST |
| Package Size | / | GW |
3kg |
| MOQ | 1 PC | Brand Name | CBP |
Hot Tags: clutch release bearing unit 85ct5765f0 for fast, China clutch release bearing unit 85ct5765f0 for fast manufacturers, factory, excavator globe valve parts, , paver components, excavator radiator parts, excavator flow sensor parts, square paver parts
