Bend Pipe (P/N: 226500401) in XCMG Road Rollers
Installation:
Align pipe ends with hydraulic lines using flange connections.
Operation:
Max working pressure: 25 MPa. Avoid sharp bends exceeding 90° during routing.
Inspection:
Check for fluid leakage or wall corrosion every 100 operating hours.
Replacement Criteria:
Replace if ovality >5% of nominal diameter or cracks visible under UV dye test.
Maintenance:
Flush quarterly with petroleum-based solvent.
Warnings:
Never weld repair-thermal distortion compromises burst pressure rating.
Prohibit over-tightening-risk of thread deformation causing seal failure.
Product Deatials
| Part Name | Bend | Part Number | 226500401 |
| Model | XP262Ⅱ.08.1.2 | Application | XCMG Roller |
| Package Size | / | GW | 2.84KG |
| MOQ | 1 PC | Brand Name | CBP |
Hot Tags: 226500401 bend for xcmg roller, China 226500401 bend for xcmg roller manufacturers, factory, triangular paver parts, excavator engine parts, excavator transmission parts, production line roller parts, wholesale paver parts, excavator flow sensor parts
