The XCMG Compactor Pipe Clamp Base (Part No. 230502924) is constructed from Q345B carbon steel via precision casting, ensuring high structural integrity under dynamic loads. Its surface undergoes phosphating anti-corrosion treatment, achieving a 15–20 μm coating thickness for enhanced rust resistance in humid or saline environments (e.g., coastal roadworks). The clamp withstands pressures ≥25 MPa and operates reliably across -40°C to 120°C, ideal for hydraulic systems exposed to thermal cycling. The modular clamp design accommodates pipe diameters of Φ12–25 mm, with pre-installed M10 stainless steel bolts and anti-loosening washers to prevent thread slippage during vibration.
Installation Recommendations
Surface Preparation: Degrease mounting surfaces using solvent to eliminate oil/grit, ensuring full clamp-to-pipeline contact.
Alignment: Position the clamp base within 10 cm of hydraulic valve block connections to minimize pipeline stress.
Torque Control: Tighten bolts crosswise using a calibrated torque wrench (25 N·m max) to avoid uneven pressure distribution. Over-tightening may deform the clamp's cast structure.
Post-Installation Check: After 8 hours of operation, re-torque bolts to compensate for initial settling. Apply lithium-based grease quarterly to bolt threads for sustained anti-seize performance.
Product Deatials
| Part Name | Pipe Clamp Seat | Part Number | 230502924 |
| Model | XD122Ⅲ.11.1.1-1 | Application | XCMG Roller |
| Package Size | / | GW | 0.26KG |
| MOQ | 1 PC | Brand Name | CBP |
Hot Tags: 230502924 pipe clamp seat for xcmg roller, China 230502924 pipe clamp seat for xcmg roller manufacturers, factory, market demand of roller parts, industry trend of roller parts, customer need of roller parts
